عملی داغ بیل مربع طریقہ ⇐ باغ کی بنیادی لائن قائم کرنے کے بعد کھیت کی کل لمبائی کو پھل دار پودوں کے درمیانی فاصلہ میں برابر حصوں میں تقسیم کر لیا جائے۔ اور کیلی لگا کر پھل دار پودوں کے نشان لگائے جاتے ہیں۔ اسی طرحدوسری بنیادی لائن ( جو پہلی بنیادی لائن پر عمودی ہو ) پر اتنے ہی فاصلے پر کیلیاں لگا کر پودوں کے نشان قائم کر لیے جاتے ہیں۔ باقی دونوں اطراف کی بنیادی لائنوں پر پودے لگانے کے دو طریقے ہیں۔
Practical Dagh Bel Square Method After establishing the baseline of the garden, the total length of the field should be divided into equal parts at the distance between the fruit trees. And the fruit trees are marked by planting stakes. Similarly, the second baseline (which is perpendicular to the first baseline) is marked by planting stakes at the same distance. There are two methods of planting trees on the remaining two sides of the baseline.
پہلا طریقہ
جس طرح پہلی دو بنیادی لائنوں پر پودوں کے نشان لگائے گئے ہیں، اس طریق پر باقی دونوں بنیادی لائنوں پر بھی فاصلے ناپ کر کیلیاں لگا دی جائیں۔ اور ان چاروں بنیادی لائنوں پر مخالف سمت کے نشانوں کو ڈوری کے ذریعہ سے ملا کر نشان لگا دیئے جائیں ۔ کھیت کے اندر ڈوری کے یہ نشان جہاں ایک دوسرے کو کائیں۔ وہاں پودوں کے نشان لگانے کے لیے کیلیاں لگادی جائیں۔ یہ طریقہ بہتر اور آسان ہے۔
First method
Just as the plant marks have been placed on the first two basic lines, in this way, the distance should be measured and pegs should be placed on the remaining two basic lines. And on these four basic lines, the marks on the opposite sides should be connected by means of a cord and marked. Where these cord marks intersect within the field, pegs should be placed there to mark the plants. This method is better and easier.
دوسرا طریقہ
پہلی دونوں بنیادی لائنوں پر باری باری عمود گرائے جائیں جہاں یہ عمود ایک دوسرے کو کاٹیں وہاں پودوں کا نشان کیلیاں لگا کر قائم کر لیا جائے ۔ یہ طریقہ پہلے کے مقابلہ میں اتنا اچھا نہیں۔
Second method
First, verticals should be dropped alternately on the two basic lines and where these verticals intersect, a plant mark should be established by driving nails. This method is not as good as the first.
مستطیل طریقہ
مربع اور مستطیل طریقہ میں صرف معمولی فرق ہے۔ یعنی جب پھل دار پودوں اور قطاروں کے ہے درمیانی فاصلے مختلف ہوں تو مربع طریقہ کی بجائے مستطیل طریقہ کہلائے گا۔ مستطیل طریقہ کی عملی داغ بیل کا طریقہ وہی ہے جو مربع طریقہ کے لیے استعمال کیا جاتا ہے۔
Rectangular method
There is only a slight difference between the square and rectangular method. That is, when the spacing between fruit plants and rows is different, the rectangular method will be called instead of the square method. The practical application of the rectangular method is the same as that used for the square method.
مخمس طریقہ
داغ بیل کا نفس طریقہ مربع طریقہ کی عملی داغ بیل مربع طریقہ میں ضروری ترمیم کا دوسرا نام ہے۔ اس طریقہ کی داغ بیل بھی آسان اور سادہ ہے۔ یعنی ہر چار پودوں کی درمیانی جگہ پر جہاں اُن کے وتر کاٹیں ، ایک مزید پانچواں عارضی پودا لگا دیا جاتا ہے۔ ڈوری کی مدد سے ہر چار پودوں کے درمیانی وتر کھینچے جاتے ہیں اور دونوں وتر کاٹنے کی جگہ پرعارضی پودا گانے کے لیے کیلی کانشان لگایا جاتا ہے۔
The Makhmas method
The method of the Dag Bel is another name for the necessary modification of the square method of the practical Dag Bel. The dag bel of this method is also simple and easy. That is, in the middle of every four plants, where their veins intersect, a fifth temporary plant is planted. With the help of a string, the veins between every four plants are pulled and a keliya is planted at the place where both veins intersect to form a temporary plant.
داغ بیل کا آسان طریقہ
مسدس طریقہ سے بھی داغ بیل کا آسان ہے اس طریقہ میں بنیادی الائن پانی کےکھال کے عمود قائم کی جاتی ہے۔فیتہ یاڈوری کی مدرسے بنیادی لائن پرمقررہ فاصلہ پر کلیاں لگا کر پودوں کے نشان لگائے جاتے ہیں۔ مسدس طریقہ سے داغ بیل کرنے کے لیے لوہے کی دو (14 گیج موٹی ) اتنی لمبی تاریں درکار ہیں ۔ جتنا پودوں کا درمیانی فاصلہ رکھنا درکار ہو۔ ان تاروں کے دونوں سروں پر لو ہے کے دو گول چھلے ( 11 انچ قطر ) لگے ہوتے ہیں، جن میں ہاتھ ڈال کر لوہے کی تاروں کو داغ بیل لگانے کے لیے سیدھا کیا جاتا ہے۔ ہر تار میں ایک یا دو جگہ برابر فاصلہ پر جوڑ لگے ہوتے ہیں۔ تاکہ تاروں کو استعمال کے بعد آسانی سے اسٹور میں رکھا جا سکے ۔ یہ جوڑ جریب کی طرز پر ہوتے ہیں۔
Hexagonal method
Staking is easier than the hexagonal method. In this method, the basic alignment of the water-skin is established. The plants are marked by placing buds at a fixed distance on the basic line of the tape or rope. To stake the stake using the hexagonal method, two iron wires (14 gauge thick) are required. As much as the distance between the plants is required. Two round iron rings (11 inches in diameter) are attached to both ends of these wires, in which the iron wires are straightened by putting their hands in them to stake the stake. Each wire has one or two joints at equal distances. So that the wires can be easily stored after use. These joints are in the style of a jirib.
طریقہ
بنیادی لائن پر یہ باڈوری کی مدد سے نشان لگانے کے بعد دوسری لائن میں پودوں کے نشان لگانے کے لیے بنیادی لائن پر ہر دو کیلیوں کو قاعدہ مان کر دونوں تاروں کو دو برابر اضلاع کی صورت میں اس طرح سیدھا کھولا جاتا ہے کہ ایک مساوی الاضلاع تکون بن جائے
Method
After marking the base line with the help of a ruler, to mark the plants in the second line, the two wires are opened straight in the form of two equal sides, taking every two knots on the base line as a rule, so that an equilateral triangle is formed.
تکون کے تیسرے سرے
تکون کے تیسرے سرے پر پودے کا نشان قائم کر لیا جاتا ہے۔ اسی طریق پر بنیادی لائن میں آگے والی ہر دو کیلیوں کو قاعدہ مان کر لوہے کی تاروں کی مدد سے تکون بنائی جاتی ہے اور دوسری لائن میں پودوں کے نشان قائم کر لیے جاتے ہیں۔
The third end of the triangle
A plant mark is established at the third end of the triangle. In the same way, a triangle is formed with the help of iron wires, taking every two canes in front of the base line as a rule, and the plant marks are established in the second line.
پودوں کی تعداد
دوسری لائن میں پودوں کی تعداد بنیادی لائن کی نسبت ایک کم رہ جاتی ہے۔ اب تیسری لائن میں اُسی طرح تکون بنا کر نشان لگائے جاتے ہیں۔ صرف ایک ہی بڑا فرق یعنی تیسری لائن کے دوسرے پودے کے نشان کو قاعدہ مان کر تیسری لائن کے پہلے پودے کا نشان اسی طریقہ پر تکون بنا کر لگایا جاتا ہے۔ اسی طرح تیسری لائن میں آخری پودے کا نشان لگایا جاتا ہے۔ تیسری لائن میں پودوں کی تعداد بنیادی لائن میں پودوں کی تعداد کے برابر ہو جاتی ہے۔ اسی طرح پانچویں، ساتویں علی ہذا القیاس تمام طاق لائنوں میں بھی پودوں کی تعداد ایک جیسی ہوگی ۔
Number of Plants
The number of plants in the second line is one less than the base line. Now the third line is marked in the same way by making a triangle. The only major difference is that the mark of the second plant in the third line is taken as a rule and the mark of the first plant in the third line is marked in the same way by making a triangle. Similarly, the last plant in the third line is marked. The number of plants in the third line becomes equal to the number of plants in the base line. Similarly, the number of plants in the fifth, seventh and all the odd lines will also be the same.
جفت لائنوں
جبکہ چوتھی، چھٹی، آٹھویں ، دسویں علی ہذا القیاس اگلی تمام جفت لائنوں میں پودوں کی تعداد دوسری لائن میں پودوں کی تعداد کے برابر ہوگی یعنی ایک پودا کم۔ مسدس طریقہ سے داغ بیل لگانے کے لیے لوہے کی دو تاروں کی بجائے دو ڈوریاں بھی استعمال کی جا سکتی ہیں۔ ہر ڈوری کی لمبائی پودوں کے درمیابی سفارش کردہ فاصلہ کے برابر ہونی چاہیے۔ ہر ڈوری کے دونوں سروں پر چھلوں کی بجائے لکڑی کی کیلیاں باندھ لی جائیں ۔ تاروں والا طریقہ نسبت زیادہ کار آمد ہے۔
Even lines
While the fourth, sixth, eighth, tenth and similarly the number of plants in all the next even lines will be equal to the number of plants in the second line i.e. one plant less. For the hexagonal method of staking vines, two ropes can also be used instead of two iron wires. The length of each rope should be equal to the recommended distance between the plants. Wooden pegs should be tied to both ends of each rope instead of rings. The wire method is more effective.
ملا جلا طریقہ
یہ مربع کا دوسرا نام ہے اور داغ بیل بھی مربع طریقہ کی طرح لگائی جاتی ہے۔ لیکن فرق صرف اتنا ہے که مربع طریقہ میں ایک ہی قسم کے پودے لگائے جاتے ہیں۔ جبکہ ملے جلے طریقہ (متبادل ) کی صورت میں دو اقسام کے پودے لگائے جاتے ہیں۔ مثلا اگر بنیادی لائن میں پہلا پودا آم کا لگایا جائے تو دوسرا پودا نسبتاً کم عمر والا ہوگا۔ یعنی مالٹایا امرد تیسرا پودا پھر م اورچوتھا پودامالٹایا امردعلی ہذا القیاس ۔
Mixed method
This is another name for square and the spotted vine is also planted like the square method. But the only difference is that in the square method, only one type of plant is planted. Whereas in the mixed method (alternating), two types of plants are planted. For example, if the first plant in the main line is mango, the second plant will be relatively young. That is, the third plant will be mango, then the fourth plant will be mango, and so on.
فاصلہ
دوسری لائن میں تمام پودے کم عمر والے لگائے جاتے ہیں۔ مالٹایا امرود تیسری لائن میں پھر پہلی لائن کی طرز پر پودے لگائے جاتے ہیں۔ اور چوتھی لائن میں دوسری لان کی طرز پرعلی ہذا القیاس باقی تمام لائنوں میں اسی طریق سے پودے لگائے جائیں گے۔ داغ بیل کے اس طریقہ میں دونوں اقسام کے پودوں کوموز وں فاصلہ مل جاتا ہے
Distance
In the second line, all the plants are planted young. In the third line, the plants are planted in the same way as in the first line. And in the fourth line, the plants are planted in the same way as in the second line. Similarly, in all the remaining lines, the plants are planted in the same way. In this method of Dagh Bel, suitable distance is found for both types of plants.
ہم أمید کرتے ہیں آپ کو “عملی داغ بیل مربع طریقہ“ کے بارے میں مکمل آگاہی مل گئی ہوگی۔۔۔
MUASHYAAAT.COM 👈🏻 مزید معلومات کیلئے ہمارے اس لنک پر کلک کریں
ہماری ویب سائٹ پر آنے کیلئےشکریہ